Inspecting; Storage - Pari SINUS2 Instrucciones De Uso

Replace the air filter:
• Pull the old air filter out of the filter holder and fit the new fil-
ter in its place.
NOTE! Only use air filters provided by PARI GmbH for use
with your compressor. If air filters that are not designed for
the compressor are used, the compressor may be dam-
aged.
• Insert the filter holder back in the compressor.

4.5 Inspecting

Inspect all product components after each cleaning and disin-
fection. Replace any broken, misshapen or seriously dis-
coloured parts.

4.6 Storage

Store your PARI product as described below:
• Wind the power cord up
loosely.
NOTE! Do not wind the power
cord around the compressor. If
the power cord is wound or
bent very tightly, the wires in-
side the cord may break. The
power cord will then be
unusable.
• Wrap all individual components in a clean, lint-free cloth
(e.g., a tea towel).
• Store your PARI product in a dry, dust-free place.
Unplug the power plug from the socket when putting the
compressor away. Electrical devices that remain plugged
into the power supply present a potential hazard source.
– 32 –