Function; Status Leds - Leuze electronic MSI-FB-PB-100 Manual Del Usuario

4. Function

4.1. Status LEDs

Five LEDs visualize the various operating states of the gateway:
LED PWR (green)
Off
On
Flashing 1.4 Hz (slowly)
Flashing 2.8 Hz (fast)
LED DAT (green)
Off
On
Flashing 1.4 Hz (slowly)
LED ERR (red)
Off
On
Flashing 1.4 Hz (slowly)
Flashing 2.8 Hz (fast)
LED BF (red)
Off
On
Flashing 1.4 Hz (slowly)
Flashing 2.8 Hz (fast)
LED SF (red)
Off
On
Flashing 1.4 Hz (slowly)
Flashing 2.8 Hz (fast)
Device status
No supply voltage. Microcontroller does not start.
Supply voltage OK. Microcontroller is running.
Setting the PROFIBUS address
MSI address assignment
Communication
No data traffic
Cyclic data traffic
Device is being configured
Device or process error
No error
Serious internal error!
See the "Memory stick" handling
Peripheral fault, e.g. overloading of the output driver
PROFIBUS error
No error
No cyclic data exchange (no C1 master present)
PROFIBUS parameterization invalid
PROFIBUS configuration invalid
Group error
No error
The connected device has an internal error or is not available
Process error or error in a device peripheral
PROFIBUS configuration and station structure do not match
21