Profibus Telegrams - Leuze electronic MSI-FB-PB-100 Manual Del Usuario

5. PROFIBUS telegrams

5.1. Structure of the parameterization telegram
Each time a MSI-FB-PB100 on the PROFIBUS-DP starts up, device parameters are transmitted to the
device. Depending on which master module is used, either standard parameters, or both standard and IF
system-specific parameters are transmitted.
The setting of the startup parameters is determined using the GSD file and is done using the project
planning tool of the master module.
Behavior at PROFIBUS errors
0: Reset outputs and Producer PDCs
1: Hold last state
Control of digital outputs
"0" = Output is controlled by PB
"1" = Output is controlled by IFS master
Bit 3: Output 4
Bit 2: Output 3
Bit 1: Output 2
Bit 0: Output 1
Real power [W] (x 0.001) : 1000
Measuring range final value of real power
Presentation range (default): -32512 ... 32512 W
Reactive power [var] (x 0.001) : 1000
Measuring range end value of the reactive power [var]
Presentation range (default): -32512 ... 32512 var
Power [VA] (x 0.001) : 1000
Measuring range end value of the apparent power [VA]
Presentation range (default): -32512 ... 32512 VA
Voltage [V] (x 0.001) : 100
Measuring range final value of voltage [V]
Presentation range (default): -3251.2 ... 3251.2 V
Current [A] (x 0.001) : 1
Measuring value final value of current [A]
Presentation range (default): -32.512 ... 32.512 A
Switch cycles (x 1) : 1
Measuring range final value of operating cycle counters
Presentation range (default): 0 ... 32512 cycles
Operation time [h] (x 0.001) : 1
Measuring range final value of operating hour counter
Presentation range (default): 0 ... 32.512 h
Energy [kWh] (x 0.001) : 1
Measuring range final value of energy counter
Presentation range (default): -32.512... 32.512 kWh
Userdefined 1 (x 0.001) : 1000
Presentation range (default): -32512 ... 32512
Userdefined 2 (x 0.001) : 1000
Userdefined Scaling 2 (x 0.001)
Presentation range (default): -32512 ... 32512
Byte order
0: Intel
1: Motorola
24