Using Latch To Install Base; Latch Locations - Graco SnugRide Click Connect Base El Manual Del Propietario

Using LATCH to Install Base

LATCH locations

Newer vehicles may have one or more seating positions with LATCH
anchorage systems. If vehicle is equipped with LATCH, the vehicle lower
anchor points may be visible at the vehicle seat crease. If not visible,
they may be marked with the symbol
See your vehicle owner's manual for exact locations, anchor
identification, and requirements for use with an infant restraint.
Typical seat in a passenger vehicle.
Other vehicle types may have
different LATCH locations or
different markings.
1. MAKE SURE vehicle is on level ground. Make
sure to check your vehicle owner's manual for
LATCH seating positions.
2. For ease of installation, press button to extend
LATCH to its MAXIMUM LENGTH
3. Position base in vehicle seat as shown.
4. Make sure LATCH is through vehicle/LATCH
belt path normally used for vehicle seat belt.
Belt must lie flat and not be twisted.
LATCH belt must not go under lock-off.
.
Vehicle Lower
Anchor Points
Vehicle
Seat Crease
.
5
.