ENGLISH
6
Introduction
Read this user manual carefully before you use the straps for the BlueTouch Pain Relief Patch
and save it for future reference.
Intended use
The BlueTouch Pain Relief Patch is a device that is intended to be used on the upper or lower back
and that can be positioned and adjusted on the treatment area by means of a fabric strap.
There are separate straps for upper back and lower back.
-
Lower back straps are available under type number PR3723.
-
Upper back straps are available under type number PR3721.
The straps are designed to be used with BlueTouch product types PR3092, PR3731, PR3733,
PR3741 and PR3743.
Important
-
Use the BlueTouch Pain Relief Patch in one of the Philips straps that has been specially
designed for it.
-
To prevent damage to the BlueTouch Pain Relief straps, wash them in a fine-mesh washing bag.
Product overview (Fig. 1)
1
Upper back strap PR3721
2
Lower back strap PR3723
3
Extension strap PR3723
Using your BlueTouch straps
You position the BlueTouch Pain Relief Patch on your body with one of the straps supplied with the
device. There is a special strap for treatment of the upper back and a special strap for treatment of
the lower back.
Note: Do not wear multiple layers of clothing or tight or thick clothing over the BlueTouch Pain Relief Patch.
Positioning the lower back strap
To place the BlueTouch Pain Relief Patch in the lower back strap, follow the steps below.
1
Place the lower back strap and the BlueTouch Pain Relief Patch in front of you on a table.
Slide the left side of the BlueTouch Pain Relief Patch behind the elastic edge of the opening in
the strap. (Fig. 2)
2
Then slide the other end of the BlueTouch Pain Relief Patch behind the opposite elastic edge
of the opening so that the whole patch is inside the lower back strap. Check to make sure
that material of the strap does not cover the LEDs. If necessary, shift the BlueTouch Pain
Relief Patch a little (Fig. 3).
3
Remove clothing from the area to be treated.
Note: Make sure the skin in the area to be treated is clean, entirely dry and free from creams,
lotions and other cosmetics.
4
Wrap the lower back strap with the BlueTouch Pain Relief Patch in it around your waist with
the treatment area of the device facing your back (Fig. 4).
5
Fasten the lower back strap with the Velcro strips on both ends of the lower back
strap (Fig. 5).
Note: Make sure the BlueTouch Pain Relief Patch in the strap is located on the area to be treated and
the treatment area is in contact with the skin.