Dyna-Glo DGE530BSP-D Manual De Instrucciones página 15

asseMBLY insTruCTiOns
14. Secure side burner assembly (S) to left side
burner table assembly (T) using 2 screws
(DD). Ensure side burner orifice placed into
the gas inlet tube of side burner. Install the
ignition wiring to the electrode assembly.
Hardware Used
M4x12 Screw
DD
x 2
Correct
Wrong
Wrong
14
Side Burner Ignition Wire
Side Burner
Gas Inlet Tube
15
S
DD
S
Electrode Assembly
Side Burner
Valve Assembly