BABYTREND Expedition JG86A Manual De Instrucciones página 7

SAFETY
Type 1 and 2
13)• The shoulder straps of the 5-point harness
have 3 attachment positions. Select the
position that places the shoulder strap
level with, or below the top of the child's
shoulder (Fig. 13a). To adjust harness
height unhook the shoulder strap from the
crotch buckle. Feed the shoulder strap
through the harness spread slots. You can
access these slots from the rear of the
seat underneath the fabric. Feed shoulder
strap through appropriate slot and
reattach shoulder strap to crotch buckle.
• Carefully place the child in the stroller seat
and bring the safety harness around the
child's waist and over the shoulders. Place
the crotch strap between the child's legs.
Insert the male end of each shoulder/waist
belt into the buckle on the crotch strap.
Tighten the harness to be snug around the
child's waist and over the child's shoulders
(Fig. 13b).
11
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Fig. 13a
Type 1 Buckle
Adjust for a snug fit
Fig. 13b
Type 2 Buckle
Shoulder Strap
Squeeze
Waist Strap
Adjust for a snug fit
Crotch Strap
Fig. 13b
TO RELEASE THE CHILD
Type 1
14)• To release, push Button on Center
Clasp, the two Harness Buckles will pop
free (Fig. 14).
Type 2
15)• To release, apply pressure to both
sides of each male clip until the clip is
released (Fig. 15).
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
Type 1
Center Clasp
Fig. 14
Type 2
Fig. 15
12