BABYTREND JG35A Manual De Instrucciones página 4

ASSEMBLY
Remove stroller from box. The front wheel
and rear wheels be installed prior
MUST
to use.
OPEN STROLLER
Unfold stroller as described in the section
following:
• Unlock the release lever (Fig. 1a) and
1)
unfold stroller frame by pulling upward
on the stroller handle until the frame
locks (Fig. 1b).
•To attatch the front wheel see
REATTATCHING FRONT WHEEL on
Page 18.
REAR WHEELS
• Rest the stroller upside down, on the
2)
handle.
• Press the rear wheel posts into the rear
frame hub until it clicks into place (Fig. 2).
NOTE: Pull on the rear wheel to ensure
that it is securely attached to the stroller.
TIRES
• Tires are shipped un-inflated. The tires
3)
should be inflated on a regular basis to
between 20 to 25 p.s.i. Always use a
bicycle style hand air pump to inflate the
tires (Fig. 3). *not included
5
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SOFT PARENT ORGANIZER
Fig. 1a
4)
SEATBACK POSITIONING
Fig. 1b
5)
Fig. 2
Fig. 3
WARNING:
Do not place hot liquids
or more than 2 lb. (0.91kg)
pounds in the parent tray.
Serious burns or unstable
conditions can result.
• Strap In The Soft Parent Organizer :
Use the hook and loop to hang the soft
parent organizer onto the stroller handle.
Follow illustrations 1-3 (Fig. 4). Be sure
to fasten tightly.
• To recline the seat: loosen the strap
through the buckle and adjust to the
required recline position (Fig. 5a). To
place the seat back in a more upright
position, press upward on the seat back
with one hand while pulling the strap
through the buckle with the other (Fig. 5b).
NOTE: The upright position should be
used only for a child that is at least 6
months old. Always re-adjust the safety
harness, including the shoulder belts,
when repositioning the seatback
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits
ASSEMBLY
1
2
3
Fig. 4
Fig. 5a
Fig. 5b
6
réservés.