Medtronic MiniLink REAL-Time Manual Del Usaurio página 12

MP6025647-2AF1 / A
9 Once it is completely dry, place it in a sealed bag labeled with the cleaning date (see
the following label example).
Cleaning the charger or tester
Caution: The blue charger and tester are not water-tight. Do NOT immerse in
water or any other cleaning agent. Do not allow liquid to come in
contact with the blue charger connector. Repeated exposure to liquid
could damage the connector and affect the performance of the charger.
If liquid comes in contact with the connector, allow the charger to air
dry before proceeding with the cleaning.
For single-patient use
1 Wash your hands thoroughly.
2 Use a damp cloth with mild cleaning solution, such as Dial
to clean any dirt or foreign material from the outside of the charger or tester. Never
use organic solvents such as paint thinner or acetone to clean the charger or tester.
3 Using an antibacterial hand sanitizer (available at a local drugstore) on a clean, dry
cloth, wipe the outside surface areas of the charger or tester. Do NOT get any hand-
sanitizer inside the tester opening or on the black connector. If you get hand sanitizer
inside these locations, allow it to air-dry.
4 Place the charger or tester on a clean, dry cloth and air dry for 2-3 minutes.
For multiple-patient use
Caution: Dispose the charger according to the local regulations for battery
disposal (non-incineration).
Device:
Date:
Method of Decontamination:
Wash:
Disinfectant:
-10-
®
Dishwashing detergent,