Bowl Mounting; Strainer And P-Trap - Bradley Verge LVLD3 Serie Manual Del Usaurio

LVLD3
6
Bowl Mounting (to Frame and Wall)
Secure the bowl to the
wall using the 1" O.D.
B
flat washers (supplied by
Bradley), 3/8" fasteners
and 3/8" anchors
(supplied by installer).
Press firmly on the back of
A
the bowl to seat the bowl
into the frame.
Tighten the top screw on
the frame.
7

Strainer and P-Trap

10
C
Check to be sure the
basin is level.
A
Strainer
2/27/2020
Connect TMV or tempered
D
line supply connections.
See page 2 for supply
connection details.
Attach the strainer screw
to the strainer. Do not
overtighten.
B
Bradley • 215-1779 Rev. G: ECN 19-08-037A
Washer
¼"-20 Screw
Thread the strainer screw
through the boss on the
drain adapter and secure
the strainer to the bowl.
Installation