Faucet Box And Valve Mounting; Overflow Plug Assembly - Bradley Verge LVLD3 Serie Manual Del Usaurio

LVLD3
2

Faucet Box and Valve Mounting

WARNING! Water supply to Battery Box Solenoid MUST be supplied using a plastic hose
(provided by Bradley).
A
3

Overflow Plug Assembly

#10-24 Screw
Packing Washer
A
Assemble overflow drain
cap to basin as shown.
8
Supply Hose to
Thermostatic Mixing
Secure fittings to
wall or other at this
approximate location
Mount the faucet boxes to the wall at
these approximate locations. Refer
to faucet instructions for proper
connections.
C
2/27/2020
Thermostatic
Mixing Valve
Valve
Hot
Supply
Assemble the shutoff valves to
the hot and cold supplies. Attach
stainless steel 1/2" supply hoses
from the hot and cold shutoff valves
to the TMA valve.
O-Ring (125-111)
Overflow plug
Overflow Plug Prepack
Bradley • 215-1779 Rev. G: ECN 19-08-037A
Cold
NONE Option
Supply
Secure the TMA valve
B
to the wall at the
location shown using
(2) #10 fasteners. See
rough-in section for
valve rough-in location.
(S45-2812)
Installation
Plastic
Hose