Intended Use - DeWalt DWE Serie Traducido De Las Instrucciones Originales

EngLIsh
Electrical Safety
The electric motor has been designed for one voltage only.
Always check that the power supply corresponds to the voltage
on the rating plate.
Your D WALT tool is double insulated in accordance
e
with EN62841; therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by a
specially prepared cord available through the D
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the
earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Using an Extension Cable
An extension cord should not be used unless absolutely
necessary. Use an approved extension cable suitable for
the power input of your charger (see Technical Data). The
minimum conductor size is 1.5 mm
is 30 m.
When using a cable reel, always unwind the cable completely.
Package Contents
The package contains:
1 Alligator saw
1 TCT saw blade set for low density building block (DWE396,
DWE397)
1 TCT saw blade set for medium density building block
(DWE398)
1 TCT saw blade set for cellular concrete and plaster board
(DWE399)
1 Hex key
1 Cutting slot scraper (DWE399 only)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
20
WALT
e
; the maximum length
2
Wear eye protection.
Do not expose the power tool to humidity.
Do not use the power tool if the main cable is
damaged.
Date Code Position (Fig. A)
The date code 17 , which also includes the year of manufacture,
is printed into the housing.
Example:
2018 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off trigger switch
1
Lock-off button
2
Rear grip handle
3
Front handle
4
5 Saw blades
Bar
6
Hex key
7
Dust port
8

Intended Use

Your D WALT alligator saw DWE396, DWE397, DWE398 and
e
DWE399 has been designed for professional sawing applications
of clay building blocks, cellular concrete, wood, plastic and
insulation materials with suitable saw blade.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
• Young children and the infirm. This appliance is not
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.