Top Rack Loading - Kenmore Ultra Wash 665.1454 Manual De Uso Y Cuidado

Loading Recommendations
Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.
To avoid damage to your delicate items, be sure china, crystal, stemware, and other similar items do not touch during
dishwasher operation.
Load lightweight and dishwasher-safe plastic items only in the top rack.
Deluxe Adjustable 2-Position Rack
You can raise or lower the top rack approximately 2" (5 cm)
to fit tall items in either the top or bottom rack. Adjusters are
located on each side of the top rack. Each adjuster has 2
preset positions.
1. To raise, lift rack until both sides are at the same height
and lock.
2. To lower, depress both tabs on rack adjusters, as shown,
and lower.
Removable Top Rack
The removable rack allows you to wash larger items such as stockpots, roasters, and cookie sheets
in the lower level rack.
IMPORTANT: Remove dishes prior to removing the upper rack from the dishwasher.
To remove the rack:
1. To gain access to the track stops, pull the upper rack forward about halfway out of the tub.
2. Press on the edge of the ridged area on the track stop while tipping the track stop toward the
center of the dishwasher. This action releases a small retaining tab that locks the track stop to
the track (see Track stop - left).
NOTE: It is helpful to use 2 hands. Take special note of the orientation of the track stops
3. With the retaining tab released, pull the track stop straight toward the opposite track to remove it.
4. After removing both track stops, gently pull the top rack out of the tracks by rolling it toward you.
12

Top Rack Loading

10-place load 12-place load
Track stop - left