Watts BT DPRF-01 Guía De Usuario página 15

The thermostat will send now the radio
configuration signal to the receiver.
- On the receiver check the good reception
(generally showed by a green LED blinking). Once
the configuration between the receiver and the
thermostat made, press on the escape key ( ) to
come back to the main screen.
- Now you can check the RF distance, go to the
room which must be regulated. Put your thermostat
on the final position (On the wall or table...), then
put the thermostat in Comfort mode (setting
temperature position 37°C). Close the door and go
to the receiver to check if the new status of the
15