Watts BT DPRF-01 Guía De Usuario página 44

Batteries level is
too less
My BT DP-01 seems work correctly but the heating doesn't
Output
RF
communication
The logo blinks (Batteries)
- Replace the batteries.
work correctly
On the receiver:
- check the good reception of RF
signal
- Check the connections.
- Check the power supply of the
heating element.
- Contact your installer.
- Check the following points :
- The receiver must be put at a
minimum distance of 50cm of all
others electrical or wireless
materials (GSM, Wi-Fi..)
- The receiver shouldn't be fixed on
a metallic part or too close of
hydraulic pipes... (Copper...)
44