Automatic Mode - Watts BT DPRF-01 Guía De Usuario

- At any time, when display is off, press on the (Ok)
key to display a few seconds the current
temperature and time.
- To restart your installation, use the navigation
keys (◄) or (►).
3.4

Automatic mode

In this mode the thermostat will follow the chosen
program (Built-in or customized) according to the
actual time and the Comfort and Reduced setting
temperatures.
You can easily override, until next program step, the
current program temperature by changing the value
with (-) or (+). Setting temperature will blink.
The small hand logo will be displayed when
override function is active.
If hand logo blinks then ITCS is ongoing.
21