manufacturer.
The device is intended for use in the electromagnetic environments listed below, and should only be
used in such environments:
Immunity
IEC 60601
test
test level
Conducted
RF
Radiated
RF
electromagnetic site survey should be considered. If the measured field strength in the location in which the
normal operation. If abnormal performance is observed, additional measures may be necessary, such as
reorienting or relocating the device.
Compliance
level
Not Ap-
plicable
used no closer to any part of the device, including cables, than
the recommended separation distance calculated from the
Recommended separation distance
in watts (W) according to the transmitter manufacturer and d is
the recommended separation distance in metres (m).
electromagnetic site survey, a should be less than the compli-
with the following symbol:
27
-
-