Tripp-Lite SmartOnline Manual Del Usuario página 4

Installation
(continued)
2-Post (Telecom) Mounting
If you mount 2U UPS models in 2-post racks, they require the addition of a Tripp Lite 2-Post
Rackmount Installation Kit (model: 2POSTKITRMWM, sold separately). See Installation Kit
owner's manual for installation procedure for 2U UPS models.
Mounting (Tower)
Your UPS can be mounted in an upright tower
position with optional base stands sold separately
by Tripp Lite (Model # 2-9USTAND). When
mounting the UPS on adjustable base stands,
make sure that the control panel is toward the top.
The control panel may be rotated to make it
easier to read. Insert a small screwdriver or
similar tool in the slots on either side of the panel,
pop it out, rotate it, and pop it back into place as
shown.
WARNING!
All UPS systems are extremely heavy. Use
caution when lifting and mounting. User must
properly stabilize the UPS when lifting and
mounting.
4