Construction Specifications - LEGRAND Whad 0.8 kVA Manual Del Usuario

COnsTrUCTiOn sPeCifiCATiOns

Power factor range with applied load
Number of output phases
AC-AC conversion efficiency with linear load
PF = 1 and charged batteries
With 50% load
With 75% load
With 100% load
electrical output specifications with battery operation
Nominal output voltage
Output frequency
Nominal output power
Active output power with linear or
non-linear load PF = 0,7
Total harmonic distortion of output voltage
with non-linear nominal load PF=0,7
Overload capacity
Power factor range tolerated with
nominal load
DC-AC conversion efficiency with linear load
PF=1 and charged batteries
With 50% load
With 75% load
With 100% load
Battery operation
Approximate autonomy in minutes with
charged batteries
50% of the applied load
80% of the applied load
Recharge time up to 90% of total load
Technical data and quantity of batteries
Reserve signal
28
®
8 Technical specifications
3 100 87 3 100 90
3 100 88 3 100 91
3 100 89
3 100 92
From 0,7 to 1
Single phase
80%
84%
90%
230V +/-1%
50Hz/60Hz +/-1%
800 VA 1000 VA
560 W 700 W
< 1%
200% for 15 seconds
from 0,7 to 1
80%
80%
80%
29 min. 23 min.
17 min. 13 min.
5-6 hours according to level of discharge
N° 4 pcs 12V 5,4Ah, sealed, lead-acid,
maintenance free batteries connected
in series
From 32.2V to 36V can be programmed by
operator
3 100 93
3 100 94
3 100 95
1500 VA
1050 VA
5.5 min.
8 min.