Before Operating; To Set The Clock; Stop/Clear - Viking TINSEB364MRR5 Manual De Uso

before operatinG

• Before operating your new microwave oven make sure you read and under-
stand this Installation/Use and Care Manual completely.
• Before the microwave oven can be used, follow these procedures:
1. Plug in the microwave oven. Close the door. The microwave oven display
will show
WELCOME PRESS CLEAR AND PRESS CLOCK
2. Touch the Stop/Clear pad.
3. Set clock.

to Set tHe clocK

1. Touch Clock pad.
2. Enter the correct time of day by touching the numbers in sequence. Touch
Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time,
appear in the display. Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave oven should be interrupted,
the display will intermittently show
power is reinstated. If this occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch Stop/Clear pad and reset
the clock for the correct time of day.

Stop/clear

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the microwave oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
.
will appear.
:
WELCOME PRESS CLEAR AND PRESS CLOCK
17
will
ERROR
after the
E