Before Operating; To Set The Clock; Stop/Clear - Viking RDMOR206 Manual De Uso Y Cuidado

bEforE opEratinG

• Before operating your new microwave oven make sure you read and
understand this Use and Care Manual completely.
• Before the microwave oven can be used, follow these procedures:
1. Plug in the microwave oven. Close the door. The microwave oven display
will show
WELCOME
2. Touch the Stop/Clear pad. : will appear.
3. Set clock.

to SEt tHE clock

1. Touch Clock pad.
2. Enter the correct time of day by touching the numbers in sequence. Touch
Clock pad again.
This is a 12 hour clock. If you attempt to enter an incorrect clock time,
appear in the display. Touch the Stop/Clear pad and re-enter the time.
• If the electrical power supply to your microwave oven should be interrupted,
the display will intermittently show
this occurs during cooking, the program will be erased. The time of day will
also be erased. Simply touch Stop/Clear pad and reset the clock for the
correct time of day.
note: Your oven can be programmed with the door open except for Start/
Touch On, Add-A-Minute, Reheat and Popcorn.

Stop/clEar

Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the microwave oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
.
WELCOME
E18
after the power is reinstated. If
will
ERROR