Mpwr ™ 40V Battery & Charger - Hoover MPWR 40V Manual De Instrucciones

MPWR
™
NOTE: Batteries are shipped in a low charge condition to prevent possible problems. You should
charge them before first use.
CHARGING AMBIENT TEMPERATURE RANGE: 5 °C – 40 °C (41 °F – 104 °F)
1
To charge the battery, slide
battery into charger. Push
backward until battery clicks into
place and LED Status Indicator
is lit.
3
When charging, the fully lit LEDs
on the battery will indicate charge
level.
12
40v Battery & Charger (Sold Separately)
2
Charger LED Status Indicator will
turn green when battery is fully
charged. If the charger flashes red
and green, an error has occurred.
Remove and replace battery.
4
To remove battery, press the
release button and slide battery
forward while holding down on
charger base.