If unsuccessful:
•
The display shows Cloning Failed.
NOTICE:
After completing the cloning process, user
can replace the Slave Radio with another
Slave Radio and by pressing the Menu/OK
button on the Master radio to clone on
second Slave Radio.
3 Exit the 'cloning' mode by long pressing the Home/
Back button.
4 If cloning fails, refer to
What To Do If Cloning Fails
on page
42.
When ordering the MUC, refer to P/N# PMPN4464_.
NOTICE:
User should not remove the radios from the
MUC when cloning is on-going.
Cloning Radio Using Two SUCs and
a Radio-to- Radio Cloning Cable
(Optional Accessory)
Figure 4: Radio to Radio Cloning
1 Before starting the cloning process, ensure that you
have the following hardware:
•
A Cloning Cable (P/N# HKKN4028_).
•
A fully charged battery in each of the radios.
English
41