Function Buttons; Data Hold / Backlight - Klein Tools CL360 Manual De Instrucciones

ENGLISH

FUNCTION BUTTONS

ON/OFF
from
To power ON the meter, rotate the Function Selector switch 2
the OFF setting to any measurement setting. To power OFF the meter,
rotate the Function Selector switch to the OFF setting. By default,
2
the meter will automatically power OFF after 15 minutes of inactivity.
If the meter automatically powers OFF while in a measurement
setting, press any button to power ON the meter. To deactivate
the power OFF functionality press and hold the "NCV" button
6
before powering ON from the OFF setting. When auto power OFF
is deactivated, the Auto Power Off icon will not be visible in the
display.

DATA HOLD / BACKLIGHT

Press the Hold/Backlight button 9 to hold the current reading on the
LCD. Press again to return to live measuring. Press and hold to turn
ON or OFF the backlight. NOTE: The backlight will automatically turn
OFF after 3 minutes of inactivity.
NON-CONTACT VOLTAGE TESTING
Press and hold the NCV button to test for AC voltage using the
6
integrated non-contact voltage tester. Approach the conductor under
test leading with the sensing antenna . The meter delivers audible
7
and visual warning signals when AC voltage is detected.
8
Non-contact voltage tester only detects AC voltages >70V AC RMS.
6