meibes Basic Pro Manual De Instrucciones página 84

Professional mode
The following items appear under ›1.5. Protective
funct.‹ next to the operation mode menus:
- ›Anti-Blocking‹
- ›Antifreeze protection‹
Call up menu item ›Anti-Blocking‹.
The pumps can be moved daily to prevent them from
getting blocked. This function is not activated as long
as the pumps are activated in normal operation.
Determine the time of the
day and the operating period.
Continue with ›Collector defrost.‹.
Activation and setting of the anti-freeze
protective function for the collector.
Via ›T ON‹, enter the anti-freeze protection
temperature for water-filled plants.
Continue to scroll.
When anti-freeze products are used, the type and the
proportion can be entered; the anti-freeze protection
temperature is calculated automatically.
Continue with ›Tank cooling‹.
Here, the parameters for tank cooling can be defined.
Use ›t-on‹ and ›t-off‹ to define the time frame
in which the tank is to be cooled via the collector.
If the ›Adjusting balance‹ is activated, the heat
dissipated via the collector is deducted from
the energy balance calculation.
Continue with ›DiffTemp‹.
38
1.5 Protective f...
Anti-blocking
Antifreeze protect.
Tank cooling
1.5.1 Anti-block...
Start
Duration
1.5.3 Antifreez...
Activation
T ref
T ON
1.5.3 Antifreez...
T ref
T ON
Glycol type
1.5.5 Cooling fu...
Activation
t ON
t OFF
Adjusting balance
11:00
5s
5.0°C
5.0°C
5.0°C
5.0°C
Water
00:00
00:07