Disassembly/Disposal - meibes Basic Pro Manual De Instrucciones

Disassembly/Disposal

Danger!
Mortal danger due to electrocution!
Before opening the terminal cover,
disconnect all poles of the power supply reliably!
For disassembly of the differential temperature
controller Basic Pro, reverse assembly procedure:
- Disconnect the power supply.
- Open the terminal cover.
- Disconnect all cables.
- Release the wall screw fastening.
- Remove the controller from its mounting location.
Danger!
Mortal danger due to electrocution!
When removing the controller, secure all stripped
cable ends so that they cannot be touched by persons!
Remove cables completely on definite removal.
Important!
The person who or the institute which is responsible for disposal of
the device must not discard the controller with the residual waste, but
must ensure correct recycling in accordance with the local provisions!
In case of doubt, ask the local disposal company or the
authorized dealer from which you have purchased the device.
40