Philips AVENT SCF862 Manual Del Usuario página 14

ENGLISH
16
1
To remove the blending jar from the main unit, hold the handle and
push backwards to unlock the jar (fig.
2
Push the lid tab to open the jar lid (fig.
3
Use the spatula provided to take the steaming basket out of the jar.
Insert the spatula through the holes on the basket (with the word
"Avent" facing upwards) and lift it up (fig.
4
Pour the steamed food into the blending jar by holding the spatula
(fig. ).
p
Note
• No need to pour out the water collected in the jar. Mix it with the
steamed food for blending.
5
Put the blending jar lid back and lock it in place (fig.
the steaming basket back in the jar when preparing for blending.
6
Shake the blending jar to evenly distribute the ingredients.
7
If needed, remove the jar lid and add additional ingredients for
blending (e.g. water for purees or additional cooked ingredients like
rice or pasta). Do not exceed the MAX food volume of 400 ml.
8
Place the blending jar back on the main unit. Turn the jar to lock into
position. Ensure the jar is secure and the handle is positioned directly
above the jar lock switch. Make sure the handle is on the right-hand
side (fig. ).
k
9
To start blending, turn the knob to "blend" position until the
ingredients are blended to the consistency of your choice (fig.
Caution
• Do not let the appliance blend for more than 30 seconds at a time.
If you have not finished blending after 30 seconds, release the knob
to stop blending and wait a few seconds before you continue. If the
main unit becomes hot, let it cool down for a few minutes before you
continue.
10
Unplug the appliance.
11
Remove the jar from the main unit and open the jar lid (fig.
12
Use the spatula to transfer the food from the jar to your bowl or plate
(fig. ).
s
).
b
).
c
).
o
). Do not put
q
).
r
).
n