Philips AVENT SCF862 Manual Del Usuario página 23

Problem Possible cause
There is too little
water in the water
tank.
There is too much
limescale buildup
in the water tank.
The food in the There is too much
jar is spilling out. food in the jar.
Excessive steam The jar lid is not
vapor is leaking fitted onto the jar
from the jar lid. correctly.
The blending There is too much
function does food in the jar.
not work.
The jar is not
placed on the main
unit correctly.
The jar lid is not
locked onto the jar
correctly.
You are using the
appliance to blend
sticky food such as
cheese.
You have been
using the
blending function
continuously for
more than 30
seconds.
Solution
Add the correct amount of water
for the steaming time. Check the
"Ingredients and steaming time"
chapter to make sure that you
have added the correct amount of
water for the steaming time of the
ingredients you want to steam or the
recipe you want to prepare.
Descale the water tank. Refer to the
"Descaling" section in the "Cleaning
and descaling" chapter.
Switch off the appliance and process
a smaller quantity.
Place the jar lid on the jar and
turn it counterclockwise to close it
securely.
Switch off the appliance and
process a smaller quantity. Never
put so much food in the jar that the
lid does not close. We advise that
the MAX food volume for blending
should not exceed 400 g.
Place the jar on the main unit
with the lid on the top, align the
handle on the jar with the
on the main unit, and turn the jar
counterclockwise to securely lock it
in place on the main unit.
Place the jar lid on the jar and
turn it counterclockwise to close it
securely.
Check the ingredients and steaming
time table or recipe examples
and choose ingredients that are
appropriate for blending.
Stop blending and let the appliance
cool down for a few seconds and
then start blending again.
ENGLISH
25
icon