How To Use - Seiko 8R48 Instrucciones

● Check the type of the crown of your watch
The crown
turns.
Turn the
crown
clockwise.
The crown
does not
turn.
* If your watch has a screw-lock crown, the crown will screw into the watch case for
added protection.
• After completing all settings of the watch, screw the crown in again by turning it
clockwise while pressing it.
• If the crown is too stiff to be screwed in, turn the crown counterclockwise once and
then give another try.
• Do not screw it in by force as it may damage the slots of the crown.
6
The crown of your watch is
the screw lock type.*
Go to
To set the watch
"HOW TO
USE"
Unscrew the crown by turning it
counterclockwise.
Unscrew.
Screw up.

HOW TO USE

This watch is an automatic watch equipped with a manual winding mechanism.
• When the watch is worn on the wrist, the motion of the wearer's arm winds the
mainspring of the watch.
• If your watch is completely stopped, it is recommended that you manually wind
the mainspring by turning the crown.
● How to manually wind the mainspring by turning the crown
1. S l ow l y tu r n the c r own c l oc k wi s e (in
the 12 o'clock direction) to wind the
mainspring.
* Turning the crown counterclockwise (the
6 o'clock direction) does not wind the
mainspring.
2. Continue to turn the crown until the
mainspring is sufficiently wound. The small
second hand will start moving.
3. Set the time and date before putting the
watch on your wrist.
7