Technical Specifications - MSA Gallet F1 XF Manual De Instrucciones

Marking
Push-to-Talk Module
Specification
Interoperability
Technical
specifications
Batteries
Weight
Environmental
conditions
7 Marking
GB
References
GA010B142W5X
GA010B146W5X
GA010B143W5X
GA010B145W5X
GA010A142W5X
GA010A146W5X
GA010A143W5X
GA010A145W5X
GA010B142W4X
10
Description
Operates with an MSA Headset, in particular helmet mounted headsets for
Gallet F1 XF / Cairns XF1 fire helmets
• PTT with yellow connector: for flexible microphone headset PTT, non ATEX
• PTT with green connector: for flexible microphone headset, ATEX
(for use with ATEX radios)
• PTT with red connector: for Bone conductive microphone headset, non
ATEX
• PTT with blue connector: for Bone conductive microphone headset, ATEX
(for use with ATEX radios)
Amplifier
Recommended headset
batteries for non-ATEX
applications
Pincer version
Clip Version
Weight may vary depending on radio plug and cable type (straight, coiled, etc.)
Use
Storage
ATEX Parameters
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Ui ≤ 10V, li ≤ 0,9A, Pi ≤ 3,5W, Ci ≤ 2,8uF, Li = 0
Gallet F1 XF
Adjustable gain (0 to 26 dB), bandwidth 300 Hz - 3 kHz
Nominal output 50 mV RMS, Harmonic distortion 5%
• CR2032
• 2 x CR2032
-20 °C to + 65 °C, relative humidity 0 to 98%
-40 °C to + 80 °C, relative humidity 0 to 98%
®
/ Cairns XF1