Hardware Characteristics - WEG SCA06 Guía De Instalación, Configuración Y Operación

Encoder Input Expansion Module - EEN1

5 HARDWARE CHARACTERISTICS

The accessory EEN1 has the following hardware characteristic:
1 encoder input (5 to 30 Vdc).
„
Figure 5.1 shows the accessory EEN1.
The input specifications, as well as the pin description of the corresponding connector, can
be found in table 5.1.
Pin Function
1 NC
2 NC
3 NC
4 NC
5 ZN
6 Z
7 BN
8 B
9 AN
10 A
11 5 V
12 5 V
13 7 V – 30 V
14 GND
10 | SCA06
Figure 5.1: Accessory EEN1
Table 5.1: Encoder input specification
Connector XA101
Description
Not connected
Not connected
Not connected
Not connected
Pulse ZN
Pulse Z
Pulse BN
Pulse B
Pulse AN
Pulse A
External supply of 5 V
External supply of 5 V
External supply of 7 V to 30 V
GND of the external supply
XA141
Specification
-
-
-
-
Encoder Input
Voltage = 5 to 24 V
Freq_max = 200 kHz
External supply of 5 V
External supply of 7 V to 30 V
GND of the external supply