Hardware Characteristics - WEG EEN2 SCA06 Guía De Instalación, Configuración Y Operación

Encoder Input Expansion Module - EEN2

5 HARDWARE CHARACTERISTICS

The accessory EEN2 has the following hardware characteristics:
2 encoder inputs (5 to 30 Vdc).
„
1 repeater output (output voltage according to supply – 5 to 30 Vdc).
„
Figure 5.1 shows the accessory EEN2.
The input specifications, as well as the pin description of the corresponding connector, can
be found in table 5.1.
10 | SCA06
Figure 5.1: Accessory EEN2
XA142