BQS BNFIX 123 Manual De Uso página 14

5. The safety of the seat can only be guaranteed by the
manufacturer if it issued by the original owner.
6. Ensure that all luggage and objects likely to cause injury in the
event of an accident are properly secured.
7. The moving parts of the car seat should not be lubricated in
any way.
8. The baby car seat must not be used without the cover. Please
use an original cover, as the cover contributes to the safety of
the seat.
9. The seat must be secured with a seat belt or ISOFIX and Top
tether, even when it not on use. An unsecured seat may injure
other passengers in the car in an urgent stop.
10. The rigid items and plastic parts of a child restraint must be so
located and installed that they are not liable, during everyday
use of the vehicle, to become trapped by a movable seat or in
a door of the vehicle.
11. Ensure that the seat is not damaged by the webbing between or
underneath heavy luggage, adjustable seats or slamming the car
door etc.
12. No alterations may be made to the product as this could affect
part or the overall safety of the seat. Please, follow carefully the
installation instructios supplied by the child seat manufacturer
otherwise it could be dangerous for the child.
13. In hot weather the plastic and metal parts of the product will be
hot. You should cover the seat when the car parked under the
sun.
14. In order to prevent damage to the cover, do not remove the
product's logo.
15. Use the seat even in a short journey, as this is when most accidents
occur.
26
16. Before the purchase, please check that the seat is properly in your
car.
17. Take a short break in long journey. So that your child has some time
for the relaxation.
18. Set a good example yourself and always wear your seat belt.
19. Tell your child that he/she should be never play with the harness
buckle
20. The figures on this manual are made to illustrate the text. The child
seat may differ from figures. Those differences will not affect neither
safety nor installation procedure.
Certification
The child safety seat has been designed, tested and certified
according to the requirements of the European Standard for Child
Safety Equipment (ECE R 44/04). The seal of approval E (in a circle)
and the approval number are located on the approval label (sticker
on the child safety seat).
This approval will be invalidated if you make any modifications to
the child safety seat. Only the manufacturer is permitted to make
modifications to the child safety seat.
BN FIX 123
Tested and certified according
Child Safety Seat:
to ECE* R 44/04
HB-10
Group
HB-10 I+II+III
Body Weight
9-36 kg
www.babyqs.com
27