Over-Temperature Protection; Residual Heat Warning; Default Working Times - EAS ELECTRIC EMCH295-3F Manual De Instrucciones

Ocultar thumbs Ver también para EMCH295-3F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Set the time by touching the
Touching the
and
it shows "--" in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator
flash for 5 seconds
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
b) If you want to change the time after the timer is set, you have to start from step 1.

3.3.6 Over-Temperature Protection

A temperature sensor equipped can monitor the temperature inside the ceramic hob. When
an excessive temperature is monitored, the ceramic hob will stop operation automatically.

3.3.7 Residual Heat Warning

When the hob has been operating for some time, there will be some residual heat. The letter
" H "appears to warn you to keep away from it.

3.3.8 Default working times

Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch
off a cooking zone. The default shutdown times are shown in the table below:
Power level
Default working timer (hour)
or
control of the timer
together, the timer is cancelled, and
1
8
2
3
4
5
8
8
4
4
13
6
7
8
9
4
2
2
2
V.2

Publicidad

Tabla de contenido
loading

Tabla de contenido