Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Set the time by touching the or control of the timer
Touching the "-" and "+" together, the timer is cancelled, and the
"--" will show in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator will
flash for 5 seconds
When cooking timer expires, the corresponding cooking zone will
be switched off automatically; The display will show "H" which
means hot;
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
b) If you want to change the time after the timer is set, you have to start from step 1.
3.3.6 Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
3.3.7 Residual Heat Warning
When the hob has been operating for some time, there will be some residual heat. The letter " H " appears
to warn you to keep away from it.
3.3.8 Default working times
Another safety feature of the hob is automatic shutdown. This occurs whenever you forget to switch off a
cooking zone. The default shutdown times are shown in the table below:
Power level
Default working timer (hour)
4. Cooking Guidelines
Take care when frying as the oil and fat heat up very quickly, particularly if you're using
PowerBoost. At extremely high temperatures oil and fat will ignite spontaneously and this
presents a serious fire risk.
1
2
3
4
8
8
8
4
13
5
6
7
8
4
4
2
2
9
2
V.2
Publicidad
Capítulos
Tabla de contenido
