Software Instructions; Machine Menu - Brasilia MODA Manual De Instrucciones Para El Usuario

Instructions for

6.0 SOFTWARE INSTRUCTIONS

6.1 PASSWORD
Press "PRG" on the master board to enter the programming mode.
The following programming menu is displayed:
the User

6.2 MACHINE MENU

The first line of the main menu shows "Select menu", the second line shows
the items to be programmed, making reference to the following list:
Options
Temperature
Pre-selections
Doses
Time and thresholds
Motor extra-time (only visible if at least a Cold slave is connected)
Payment systems
Prices
Price selections
Discounts
Promotions
Preventive action
Decounters
Sales
Clock
Default data
Remote connection (Only visible if a modem is installed (provided, not managed)
Item Number
Configuration
Press the programming key again or hold down the ESC key for 1.5 seconds
to exit the main menu and return to normal state.
6.3 MAINTENANCE
Maintenance is performed by pressing the key 'Service'.
In line 1 "Maintenance xxx" will be displayed, where xxx displays the boiler
temperature, and in line 2 the possible detected alarms.
Pressing twice the key Service, the stand by heating phase will be bypassed,
allowing you to perform test selections even on non regimen temperatures.
Pressing a key the slave boiler temperature will be displayed in scroll.
The maintenance panel has the following functions
ATTENTION: the illustrated menu corresponds to the machine version with all
supplies. This menu may differ from the displayed commands, the position
of the commands, based on the kit installed in the machine.
19
(provided, not managed)
(provided, not managed)
ENGLISH