Strain Relief - Star 4H05A05001 Manual Del Usuario

ELECTRICAL HOOKUP FROM THE HOUSE TO PUMP AND PRESSURE TANK
3. Thread the cable from the house electrical
service through one of the holes in the side
of the pressure switch and tighten down the
electric wire strain relief.
CAUTION: Do not crush wire. (Fig. 3)
4. Connect the two wires from the house
electrical service to the outside pressure
switch terminals (L1 and L4). (Fig. 4)
5. Thread the cable from the pump through
the remaining hole in the side of the
pressure switch and tighten down the
electric wire strain relief.
CAUTION: Do not crush wire.
20
Copyright © 2011 Star Water Systems. All rights reserved.
3
L1
4
L1
L4
5
L4

Strain Relief

IL1162
L1
L4