Star 4H05A05001 Manual Del Usuario página 26

ELECTRICAL HOOKUP FROM THE HOUSE TO PUMP AND PRESSURE TANK
12. Thread the cable from the control box
through the remaining hole in the side of
the pressure switch and tighten down the
electric wire strain relief.
CAUTION: Do not crush wire. (Fig. 12)
13. Connect the two wires from the control
box to the inside pressure switch terminals
(L2 and L3). (Fig. 13)
14. Connect green ground wires from the
control box cable and the house electric
cable to the two ground screws on base of
pressure switch. Replace switch cover.
(Fig 14)
12
26
Copyright © 2011 Star Water Systems. All rights reserved.
13
L2
L3
14
From
Control Box
Ground Screws
IL1165
L2
L3
IL1167
From
Power Source
IL1182