ELECTRICAL HOOKUP FROM THE HOUSE TO PUMP AND PRESSURE TANK
3. Thread the electrical wire from pump into
the right opening in the bottom of the
control box and tighten the electric wire
strain relief securely. (Fig. 3)
4. Attach the black, yellow and red wires to the
appropriate terminals marked "B", "Y" and
"R". (Fig. 4)
5. Connect the green ground wire from the
pump to the green ground screw in the
lower right corner of the control box.
(Fig. 5)
23
Copyright © 2011 Star Water Systems. All rights reserved.
3
L1
L2
4
L1
L2
5
L1
L2
R
Y
B
IL1174
R
Y
B
R
Y
B
IL117