Display Backlighting; Shutting Down The Instrument - Hach sensION+ MM150 Manual

6. Operation

6.12. Display backlighting

At the end of a measurement, whether in stability or continuous, the screen automatically lights up for 2
seconds.
The user can also light up the screen at any other time by pressing
seconds.
Changing backlighting time
Follow the diagram.
Notes: Only the time of the manual
backlighting of the display can be
modified.
You cannot change the automatic
backlighting time (2 sec.) after
completing a measurement.
By increasing the display's
backlighting time, you reduce the
autonomy of the instrument (battery
life).
Continuous backlighting
In low-light environments, it
is advisable to work with the
screen lit.
Note: Backlighting the display
reduces the autonomy of the
instrument (battery life).

6.13. Shutting down the instrument

Follow the diagram below.
sensION+ MM150 HACH 0710.indd ANG:21 sensION+ MM150 HACH 0710.indd ANG:21
, which will backlight the screen for 3
inmediatamente Immediately
3 s
2 s
6 s
21
7/9/10 13:03:04 7/9/10 13:03:04