GRE 770803 Manual De Instalación Y Mantenimiento página 3

BEFORE THE INSTALLATION
• The information appearing in this installation manual shows exactly how it should be done. Nevertheless, the illustrations in the same are to
explain the assembly process. Contractual elements will not be considered regarding the shape, the colours and the aspects shown in the
illustrations.
• In line with its ongoing product improvement policy, Manufacturas GRE, S.A. reserves the right to make any modifications, at any time and
without previous warning, which does not interfere with product performance.
GUARANTEE
• This product is designed for private use.
• This product is for the exclusive purpose of maintaining fresh water swimming pools.
• The product is designed to operate with clean water at temperatures no greater than 40
• It should be installed according to relative safety instructions for pools and specific local regulations.
• The compulsory accident prevention regulations should be meticulously respected.
• Any modification to the pump requires previous approval nd in writing from the manufacturer.
• Original spare parts and accessories authorized by the manufacturer guarantee a high level of safety. The manufacturer of the pump declines
any responsibility derived from injuries or material damages caused by the use of unauthorized spare parts or accessories.
• During use, some parts of the pump use electricity current. All operations on the pump or on equipment connected to the same should be
made after disconnection from the power supply or disconnection of the starting devices.
• The user should make sure that maintenance operations are performed by trained and qualified personnel that have carefully and previously
read the installation and operation instructions.
• A complete safe operation of the pump is only guaranteed if the installation and operation instructions are correctly respected.
• Make sure that children cannot play with the pump.
• This device is not designed to be used by physically, psychologically and sensorially disabled persons (including children), or those lacking
experience or knowledge unless any person responsible for their safety is supervising and assessing them.
• The pump should not be run without water.
• The pump should be connected to the power via a circuit breaker with derivation to earth and sensitivity not exceeding 30 mA
• This product is guaranteed for 2 years after the date of purchase.
• The product is not guaranteed in the case of using a salt device.
• The guarantee does not apply:
- In the case of installation or use not in accordance to our instructions.
- In the case of damage(s) caused by incorrect manipulation or by an inadequate installation.
- In the case that the pump has been operated without water.
• All claims against the guarantee should be accompanied by proof of purchase.
• You may be asked for photographs to justify the claim.
• No returns of material will be accepted without previous agreement.
• The client will support all costs of all returns of goods, (packaging and transport).
• The guarantee is limited to the repair or replacement of the defective part. It does not include, under any circumstance, the payment of
compensation for harm and damages.
• Manufacturas Gré interchanges components in exchange for others to be verified. If, after the verification no anomaly or dysfunction is
detected, Manufacturas Gré reserves the right to invoice the client for the transport costs and other expenses.
• The products that effectively show defects will be repaired or will be replaced free of transport costs.
• An estimate will be provided for the products not included in the guarantee. After the client accepts the estimate and formalizes the
agreement, the repairs will be made and the product delivered.
• Manufacturas GRE, S.A. declines all responsibility derived from misuse or inadequate use not in accordance to this instruction manual.
• The manual should be kept for later consultation and should be with the product until it is started.
• In the case of malfunction, check the instruction manual and consult with a specialized technician if necessary.
• Manufacturas GRE, S.A. constantly tries to improve the types and models of its devices. We trust that our user understand any technical
modifications regarding the shape and standard equipment of the products implement by Manufacturas GRE, S.A.
IMPORTANT
• If the power cable is damaged, it should be replaced by a qualified electrician and respecting local regulations to avoid any possible
hazards.
• The filter group operates at high pressure. Air enters the system and is pressurized. Compressed air can cause the lid to be come loose, which
can cause serious or mortal injury or material damage. Meticulously follow these instructions to evade any hazards.
• Switch off the pump before changing position of the multidirectional flap.
• Regularly clean the pre-filter and pool skimmer basket to evade deterioration risks.
o
C.
1 MONOBLOCK FILTER - INSTALLATION AND GENERAL MAINTENACE MANUAL
ENGLISH