Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
How it Works:
This Humidifier is designed to quietly provide invisible cool moisture. Water is pumped from
the water reservoir through the water flow channel. Water is dispersed from water flow
channel into the wicking filter which helps remove minerals and impurities from the water.
A fan quietly pushes moisture out of the wick and into the air in the form of an ultra fine
invisible mist.
The unique top fill design makes filling as easy as watering a plant. This unit is also equipped
with a water circulating feature which helps indicate when refilling is needed.
Your humidifier is made up
of these parts:
Water Outlet
Water Hose
Pump Outlet
Water Pump
Main Housing
Water Fill Baffle
Main Housing
Power Knob
Moisture Output Switch
2
Clear Protective Cover
Top Grille
2 Wicking Filters
Wicking Filter Tray
Fill Funnel
Water Window
SETTING UP YOUR HUMIDIFIER
Remove from box
Remove packaging material. Remove and set aside
instruction manual. Recycle box and packaging
materials or save box for end of season storage.
Remove tape
To prevent water pump from shifting during transportation
it has been taped to the inside of your humidifier.
Remove grille and filter tray and locate the water pump
on the bottom of the main housing. Remove shipping tape
(Fig. 1) located on water pump and place water pump
back in slot (Fig. 2). Replace filter tray and grille on top of
main housing.
Make sure water pump is securely in place and hose
is not bent or crimped or unit will not operate.
Placement
Select a firm, level location at least 12" (30cm)
from any walls for proper airflow. Place the
humidifier on a water-resistant surface, as
water can damage furniture and some flooring.
Manufacturer will not accept responsibility for
property damage caused by water spillage.
Fig. 1
Fig. 2
3
Publicidad
Tabla de contenido
