Descargar
Compartir
Imprimir esta página
  1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Accesorios de Automóviles
  5. 95-5822 Series
  6. Instrucciones de instalación

Metra 95-5822 Series Instrucciones De Instalación

Ocultar thumbs
1
2
3
4
5
6
7
8

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 95-5822
Ford F-150 2009-2010, Lariat/King Ranch/
Platinum/XLT models
KIT FEATURES
• Double DIN radio provision
• Stacked ISO radio provision
• Painted or wood grain: 95-5822B - Black,
95-5822MM Lariat - Milano maple, 95-5822CM King
Ranch - Curly maple, 95-5822AS Plantinum - Ash satin
KIT COMPONENTS
• A) Double DIN radio housing • B) Radio housing trim panel • C) Double DIN radio housing brackets
• D) (6) "U" style panel clips
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • XVSI-5220-NAV • XVSI-5521-NAV • AX-ADBOX2 interface • AX-ADFD02 harness
Antenna Adapter: • 40-CR10 - Chrysler antenna adapter 2002-up
TOOLS REQUIRED
• Cutting tool • Phillips screwdriver • Socket wrench • Torx driver • Panel removal tool
METRA. The World's best kits.
APPLICATIONS
with 6 buttons (not for NAV equipped)
95-5822 Series
C
D
™
1-800-221-0932
Dash Disassembly
– Ford F-150 2009-2010 ........................................ 2
Kit Preparation
– Ford F-150 2009-2010 ........................................ 3
Kit Assembly
– Double DIN radio provision ................................... 4
– Stacked ISO radio provision .................................. 4
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION
Table of Contents

Publicidad

loading

Manuales relacionados para Metra 95-5822 Series

Resumen de contenidos para Metra 95-5822 Series

  • Página 1 NOTE: Refer to the instructions included with the TOOLS REQUIRED aftermarket radio. • Cutting tool • Phillips screwdriver • Socket wrench • Torx driver • Panel removal tool METRA. The World’s best kits. ™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION...
  • Página 2 Dash Disassembly 95-5822 Ford F-150 2009-2010 1. Unclip and remove the switch 6. Unclip and remove the cigarette panel to the right of the cigarette lighter socket from the radio trim panel. (Figure F) lighter then remove the (1) 9/32” screw exposed.
  • Página 3 Kit Preparation 95-5822 Ford F-150 2009-2010 1. Clip the hazard/airbag switch and driver info switch assemblies into the radio housing in the same location as the factory radio trim panel. (Figure A) 2. Clip the cigarette lighter socket into the radio housing in the same location as the factory radio trim panel.
  • Página 4 Metra or AXXESS. Re-connect the negative battery terminal and test the Metra recommends MECP unit for proper operation. certified technicians 5. Reassemble dash in reverse order of disassembly. (Figure C) METRA. The World’s best kits. ™ 1-800-221-0932 metraonline.com © COPYRIGHT 2004-2013 METRA ELECTRONICS CORPORATION...

  • Página 5: Componentes Del Kit

    • A) Carcasa de radio doble DIN • B) Panel de moldura de la carcasa del radio • C) Soportes doble DIN de la carcasa del radio • D) (6) ganchos del panel estilo “U” PRECAUCIÓN: Metra recomienda desconectar el terminal negativo de la batería antes de comenzar cualquier...
  • Página 6 Desmontaje del tablero 95-5822 Ford F-150 2009-2010 1. Desenganche y quite el panel y del interruptor de información de interruptores a la derecha del para el conductor del panel de encendedor de cigarrillos y luego la moldura del radio de fábrica. quite el tornillo de 9/32”...
  • Página 7 Preparación del kit 95-5822 Ford F-150 2009-2010 1. Enganche los ensambles del interruptor de las luces intermitentes/bolsa de aire y del interruptor de información para el conductor en la carcasa del radio, en el mismo lugar que el panel de la moldura del radio de fábrica.

  • Página 8: Provisión De Radio Doble Din O Iso Vertical

    4. Ubique el arnés de cableado de fábrica www.installerinstitute.com o llame al 800-354-6782 for more information and take steps toward a better tomorrow. en el tablero. Metra recomienda el 800-354-6782 para obtener más información y avance hacia un futuro mejor. uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS.