Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Cut template • D) (4) Phillips screws
A
Metra. The World's Best Kits.
®
Ford Econoline
Visit
MetraOnline.com
specific applications.
KIT FEATURES
• ISO DDIN radio provision
B
MetraOnline.com
1992-1996
for more detailed information about the product and up-to-date vehicle
C
D
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION
95-5704
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation ....................................................2-3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Visit metraonline.com for audio and steering
wheel interface options.
Antenna adapter: Not required
TOOLS REQUIRED
• Cutting tool • Ford radio removal tools*
• Phillips screwdriver • T-20 Torx screwdriver
• Scribe tool or silver marker
• 1/8" drill bit
* Metra part number 86-5618
Attention!
With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
REV. 7/19/21 INST95-5704
Publicidad
Tabla de contenido
Manuales relacionados para Metra 95-5704
Resumen de contenidos para Metra 95-5704
- Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5704...
-
Página 2: Dash Disassembly
(Figure B) Continued on the next page 6. Unclip, unplug, and remove the entire dash panel. (Figure A) 7. Using Metra’s 86-5618 radio removal tools (sold separately), release the radio (Figure B) from the dash. Slide the radio out, then unplug and remove the radio. (Figure B) -
Página 3: Kit Assembly
(Figure D) the radio. Metra recommends using the proper mating adapter from Metra. Test Continue to Kit Assembly the radio for proper operation. 3. Slide the radio assembly into the dash. - Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5704...
- Página 5 • Herramienta de corte • Herramientas de retiro de radio Ford* • Destornillador Phillips • Destornillador Torx T-20 • Punzón o marcador color plata * Número de pieza Metra 86-5618 ¡Atención! Deje que el vehículo se asiente con la llave fuera del encendido durante unos minutos antes de quitar la radio de fábrica.
-
Página 6: Desmontaje Del Tablero
6. Desenganche, desconecte y quite el panel del tablero completo. (Figura A) 7. Saque el radio del tablero usando las herramientas de retiro de radio de Metra 86- (Figura B) 5618 (se venden por separado). Deslice el radio hacia afuera y, después, desconéctelo y quítelo. -
Página 7: Ensamble Del Kit
Metra recomienda el sub-tablero. (Figura D) uso de un adaptador de acoplamiento adecuado de Metra. Pruebe el radio para Continúe con el ensamble del kit asegurarse de que funciona bien. Detalles 3. - Página 8 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recomienda MECP técnicos certificados Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 7/19/21 INST95-5704...