Safety Instructions - Victron energy BlueSolar MPPT 75/10 Manual

Ocultar thumbs Ver también para BlueSolar MPPT 75/10:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2 Safety instructions

Danger of explosion from sparking
Danger of electric shock
● It is advised to read this manual carefully before the product is installed and put into
use.
● This product is designed and tested in accordance with international standards. The
equipment should be used for the designated application only.
● Install the product in a heatproof environment. Ensure therefore that there are no
chemicals, plastic parts, curtains or other textiles, etc. in the immediate vicinity of the
equipment.
● Ensure that the equipment is used under the correct operating conditions. Never
operate it in a w et environment.
● Never use the product at sites w here gas or dust explosions could occur.
● Ensure that there is alw ays sufficient free space around the product for ventilation.
● Refer to the specifications provided by the manufacturer of the battery to ensure that
the battery is suitable for use w ith this product. The battery manufacturer's safety
instructions should alw ays be observed.
● Protect the solar modules from incident light during installation, e.g. cover them.
● Never touch uninsulated cable ends.
● Use only insulated tools.
● Connections must alw ays be made in the sequence described in section 3.5.
● The installer of the product must provide a means for cable strain relief to prevent the
transmission of stress to the connections.
● In addition to this manual, the system operation or service manual must include a battery
maintance manual applicable to the type of batteries used.
3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bluesolar mppt 75/15

Tabla de contenido