9. Hold the casing in place with one hand while feeding the sausage mixture
surface.
NOTE:
surface, such as a tray.
has been stuffed, twist the open end to close, then tie off the ends of the casing
tightly to close. Twist into links.
11.
pockets do appear in the sausage use a pin to prick the bubbles. The small
holes will seal naturally.
USING THE REVERSE FUNCTION
FIGURE I
The reverse function only should be
OFF
used for brief periods of time to help
clear a jam.
1
1. Allow the Grinder Motor to come
to a COMPLETE STOP before
2
engaging in reverse "REV".
2. Turn the knob counterclockwise
so that it points to "REV" (Figure I).
NOTE: NEVER operate the
Grinder in reverse for more than 5
seconds.
3. If the Grinder remains jammed after using the reverse function, turn
the Grinder OFF (OFF), disconnect the Grinder from the power source.
Disassemble the Grinder Head and clean it according to the "Cleaning
Instructions." Re-assemble the Grinder and follow the "Grinding Instructions/
13