Specifications; Unit Description - Shindaiwa HT2510 Manual Del Propietario - Operador

Specifications
Model Name ....................................................
Engine Model ..................................................
Engine Type ....................................................
Dry Weight
(excluding cutting attachment)
Bore x Stroke ...................................................
Displacement ...................................................
Engine Speed at Maximum Power Output ...
Maximum Power Output ...............................
Engine Speed at Idling ...................................
Maximum Engine Speed ................................
Fuel/Oil Ratio ..................................................
Fuel Tank Capacity .........................................
Carburetor .......................................................
Ignition System ...............................................
Spark Plug ........................................................
Air Cleaner .......................................................
Starting Method ..............................................
Stopping Method .............................................
Dimensions (L x W x H) ................................
Sound Pressure Level* ..................... Idling
Sound Power Level*........................................
Vibration Level (Front/Rear)* ...... Idling
Specifications are subject to change without notice.

Unit Description

Familiarize yourself with your
machine and its various components.
Understanding your machine helps
ensure top performance, long service
life, and safer operation.
Prior to Assembly
Before assembling this product, please
make sure you have all the components
required for a complete unit:
• Engine assembly (powerhead)
• Cutter and gearcase assembly
• Rear handle
• Front handle
• Bolt package
• Tool kit including, allen wrenches,
combination spark plug/13 mm
wrench
Carefully inspect all components for
damage.
IMPORTANT!
The terms "left," "left-hand," and
"LH"; "right," "right-hand," and "RH" ;
"front" and "rear" refer to directions as
viewed by the operator during normal
operation of this product.
WARNING!
Do not make unauthorized modifica-
tions or alterations to this machine or
any of its components or accessories.
HT2510/EC2-3 HT2510/EC2-4
SHF2510EC2
4-cycle, horizontal-cylinder, air-cooled
........ 5.7 kg
34 mm x 27 mm
24.5 cm
8,000 min
0.83 kW
3,000 min
10,500 min
550 cm
Walbro WYJ, Diaphragm type
Fully Electronic, program controlled
NGK CMR5H
Non-reversible heavy-duty filter element
Recoil Starter
Slide Switch, grounding type
1100 x 240 x 230 mm
72dB (A)
Racing 94dB (A)
102dB (A)
3.0/3.4 m/s
Racing 7.9/8.9 m/s
2
* Sound Pressure Level: in accordance with ISO 22868
DH2510
Fuel Cap
ON-OFF
Switch
Fuel Tank
HT2510
Fuel Cap
ON-OFF
Switch
Fuel Tank
Figure 3
6.0 kg
3
(RPM)
-1
(RPM)
-1
(RPM)
-1
50:1
3
1410 x 240 x 230 mm
71dB (A)
93dB (A)
103dB (A)
4.8/4.9 m/s
2 2
13.6/10.7 m/s
2
* Sound Power Level: in accordance with ISO 3744 and
ISO 11094 (average data between at idling and racing)
* Vibration Level: in accordance with EN 28662-1
Guide Bar
Cutter
Cover
Protector
Choke
Air Cleaner
Cover
Gearcase
Guide Bar
Cutter
Cover
Choke
Air Cleaner
Cover
Gearcase
DH2510/EC2-2 DH2510/EC2-3
SHF2510EC2
4-cycle, horizontal-cylinder, air-cooled
5.9 kg 6.1 kg
34 mm x 27 mm
24.5 cm
3
8,000 min (RPM)
-1
0.83 kW
3,000 min (RPM)
-1
10,500 min (RPM)
-1
50:1
550 cm
3
Walbro WYJ, Diaphragm type
Fully Electronic, program controlled
NGK CMR5H
Non-reversible heavy-duty filter element
Recoil Starter
Slide Switch, grounding type
1100 x 245 x 230 mm 1220 x 245 x 230 mm
71dB (A) 72dB (A)
94dB (A) 97dB (A)
102dB (A) 103dB (A)
4.2/6.0 m/s 3.2/5.0 m/s
2
9.3/12.4 m/s 10.0/12.7 m/s
2
Front Handle
Muffler
Protector
Throttle
Trigger
Front Handle
Protector
Muffler
Throttle Trigger
2
2
Recoil
Starter
Rear Handle
Recoil
Starter
Rear Handle
5