Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
do you have - square - round - or faCtory Crossbars?
Loosen the tabs in the
SQUARE
SnapArounds by bending
them repeatedly.
(SQUARE continued)
ROUND
Attach four SnapArounds to the
front crossbar (2 per saddle).
Attach four MightyMounts to the
front crossbar (2 per saddle).
If your MightyMounts require
bar caps, install them now.
FACTORY BARS
UNIVERSAL MIGHTYMOUNT
ROUND / SQUARE:
• Push bolts through
saddles and into
SnapArounds.
• Attach hex keys
and tighten.
install seCond set of saddles or rollers.
SADDLES:
• Repeat installation for second
set of saddles,
YAKIMA HULLYROLLERS:
• Follow installation instructions
in HullyRollers kit.
load your Craft
• Place craft in saddles.
• Adjust position of
saddles as needed.
• Completely tighten all
bar attachments.
1033395A-2/12
Follow the Universal MightyMount instructions and
#03590
refer to this instruction for correct installation.
CEntER CRAFt on SAddlES
Remove the
tabs with
scissors or
pliers.
FACTORY BARS:
• Push bolts through
the saddles and into
the MightyMounts.
• Tighten bolts with
MightyMount
wrench.
loosen attachment hardware
tighten all bar attachments.
completely before sliding
saddles along crossbars.
Publicidad
Tabla de contenido
