Steam Function - Zavor LUX LCD Manual Del Usuario

Ocultar thumbs Ver también para LUX LCD:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

self-locking pin with the unlocked symbol and turn the lid counterclockwise
until it locks into place.
4.
Turn the pressure regulator knob to STEAM.
5.
Turn the dial until the SLOW COOK function is selected (the words will
blink) and confirm it by pressing the dial. The screen will show the settings
for this function to the right. In addition to the settings, there is also a
CUSTOM setting. For instruction on how to use the CUSTOM setting, see
page 8.
NOTE: To go back to the main menu screen, press MENU.
6.
Choose your desired setting by turning the dial. Press the dial to select
the setting. The preset temperature (High or Low) and cooking time will
appear at the top of the screen.
If you wish to adjust those settings, turn the dial to select the temperature
(High or Low) and then press the dial or the ADJUST button to confirm
it. The cooking time will then start blinking to show it can be adjusted.
Change the time by turning the dial and set your time by pressing the
START/STOP button.
NOTE: Pressing the ADJUST button will only switch the programming
option between temperature and cooking time.
7.
After you press the START/STOP button, the screen will turn green and it
will display the programmed temperature and time. You will also see the
preheat icon at the bottom of the screen and the preheating bar which will
show you how far along in the preheating process the unit is.
NOTE: If you forget to press the START/STOP button, the unit will beep
twice after 30 seconds, the light on the screen will turn off and the unit will
return to standby mode.
8.
Once the temperature has been reached, the unit will beep, the cooking
icon will appear at the bottom of the screen and it will start to count down
your cooking time.
9.
When the cooking time ends, the unit will beep and switch to the KEEP
WARM function. Press the START/STOP button to cancel the program.

Steam Function

This program allows you to steam delicate foods such as fish and vegetables.
18
Steam Function Temperature/Timer Chart:
Setting
Temperature
Vegetable
212°F
Fish
212°F
1.
Place the removable cooking pot into the multi-cooker.
2.
Place about 1-2 cups of water into the removable cooking pot. Insert the
trivet and steamer basket making sure that the water sits a little bit below
the steamer basket.
3.
Place ingredients into the steamer basket and close the lid of the cooker.
The screen will display a Close Lid icon
button to begin cooking and the lid is open or not locked properly, the
icon on the screen will change from open
beep to indicate that the lid needs to be closed.
4.
Turn the pressure regulating knob to STEAM.
5.
Turn the dial until the STEAM function is selected (the words will blink) and
confirm it by pressing the dial. The screen will show the settings for this
function to the right.
NOTE: To go back to the main menu screen, press MENU.
6.
Choose your desired setting by turning the dial. Press the dial to select
the setting. The preset steaming time will appear at the top of the screen.
If you wish to adjust it, turn the dial to select the desired time. Next, press
the START/STOP button to confirm it.
7.
After you press the START/STOP button, the screen will turn green and it
will display the programmed time at the top. You will also see the preheat
icon at the bottom of the screen and the preheating bar which will show
you how far along in the preheating process the unit is.
NOTE: If you forget to press the START/STOP button, the unit will beep
twice after 30 seconds, the light on the screen will turn off and the unit will
return to standby mode.
8.
Once the temperature has been reached, the unit will beep, the cooking
icon will appear at the bottom of the screen and it will start to count your
steaming time.
9.
When the cooking time ends, the unit will beep and switch to the KEEP
WARM function. Press the START/STOP button to cancel the program.
NOTE: When using the STEAM function the regulator knob must be
turned to STEAM.
NOTE: If you are using the STEAM function without enough liquid in the
removable cooking pot, the unit will beep every 5 seconds to alert you
that more liquid needs to be added.
Preset Time
Timer
1 minute-2 hours,
3 minutes
1 minute increments
1 minute-2 hours,
4 minutes
1 minute increments
. If you press the START/STOP
to close
and the unit will
19

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido