Care & Cleaning - Black and Decker FP2650S Manual Del Usuario

12. Tasks not recommended for the blender:
• Whipping cream
• Beating egg whites
• Mixing dough
• Mashing potatoes
• Grinding meats
• extracting juice from fruits and vegetables
SELECTinG A SPEED
LOW
For blending frozen juices and drink mixes
Preparing salad dressings
Pureeing hot soups
Puddings
Blending pancake and waffle batter or mixes
Beating eggs for omelets and custards
Making cookie crumbs and bread crumbs
Preparing sauces and salsas
HiGH
Coarse to fine chopping of nuts, vegetables and fruits
Grinding hard cheeses, spices and coffee beans
Baby foods: fruits and vegetables
Protein drinks
Milk shakes and malts
Frozen drinks and smoothies
PULSE Crushing ice
Chopping vegetables
Thick beverages
Smoothies

Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified
service personnel.
note: do not attempt to sharpen the cutting edges of the blades or discs.
They are permanently sharpened at the factory and will be ruined by
attempted sharpening.
CLEAninG
note: Before cleaning, be sure unit is turned off and cord is unplugged.
• Completely disassemble processor parts before washing.
• Whenever possible, rinse parts immediately after processing for easy
cleanup.
• Wipe base and feet with a damp cloth and dry thoroughly. Stubborn spots
can be removed by rubbing with a damp cloth and a mild, nonabrasive
cleaner. do not immerse base in liquid.
• All removable parts can be washed by hand or in a dishwasher. Hand
washing of plastic parts will help to maintain the processor's appearance.
• If washing by hand, fill workbowl with hot soapy water and rapidly raise
and lower the cutting blade and discs up and down on the center shaft.
• If your sink has a sprayer nozzle, you will find it helpful in rinsing the
blades.
• If washing in a dishwasher, place removable parts on top rack only – not in
or near utensil basket.
• Some staining of parts may occur. Make a paste of 2 tablespoons baking
soda /1 tablespoon water. Apply to stains and let stand overnight. Rinse
and dry.
• do not use rough scouring pads or cleansers on any plastic or metal parts.
• do not allow blades or discs to soak in water for long periods of time.
• Remove the workbowl cover and blade. Invert an empty 35-mm film
canister over the hole in the workbowl. Fill with hot, soapy water and allow
to soak.
• Remember to clean the internal shaft of the chopping blade; use a baby
bottle brush to remove any clogged food particles.
• If you are having trouble closing the cover over the workbowl, apply a small
amount of vegetable oil to the rim of the cover and workbowl. This should
make the pieces work smoother when attaching the cover to the bowl.